Frac Tanks are constructed to hold up under adverse conditions when they are moved to postion for use in the field.
Tanks have a convienent hatch located at ground level and connectors for switch and work lights on the side and rear.
The unique V-bottom floor design gives the operator easier cleaning and maintenance of the frac tank. Manufactured with 0.25" the floor on our frac tanks are supported with the strongest undercarriage of any tank in production.
The smooth lined inner walls of our frac tanks eliminate build up of material when compared to the conventional corrugated material used by other manufacturers. This key feature allows for much easier clean out.
We can custom manufacture our frac tanks for valve placement to the customer's specifications. Menard Sales has manufactured both internally and externally placed valves based upon the needs of our clients.
Specifications:
500 Bbl. Frac Tank
Floor Support: 4" x 10" x 1/4" tubing outer with 2" x 6" stringers
Floor: V-Design for easy clean-out - 1/4" Plate with front sump
Walls: 1/4" Plate - Smooth inside with corrugated outside
Roof: 3/16" Plate with channel stiffeners
Drain: 4' valve at rear - 3" threaded vent-overflow
Manifold: Internal with (4) 4" valves, or external is optional
Manways: (2) front & side
Hatches: (3) non-sealed on roof
Access: Front stairways with hand rail - rear swing-out ladder
Pickup: 3/8" Plate - standard 5th wheel king pin
Tires: 11R x 22.5
Axle: 25,000 lb with air brakes
Primer: Epoxy coated all exterior and interior surfaces
Paint: Standard polyurethane or customer specs. Gel-Line with valve
|
